How to maintain and maintain the concrete mixer

1. Check the oil and circuit and control equipment at each lubrication location and fill the oil as required.

2. Maintain the body clean and remove dirt and obstructions from the body.

3. Before each shift, add water to the mixing drum for 1 to 2 minutes, and check the reliability of the clutch and brake device.

4. In order to ensure its technical performance, it must be noted that in the repair and transformation, it must be shoddy. High quality bearings must be used.

5. After the end of each shift, the concrete mixer should be carefully cleaned.

6. During the operation of the concrete mixer, the noise of the motor, reducer and transmission gear should be checked at any time, and the temperature rise is too high.